Cart 0
Kinetico® 9306 Taste & Odor Filter Cartridge

Kinetico® 9306 Taste & Odor Filter Cartridge

9306

All Kinetico products are dealer exclusive and must be ordered through your local dealer. We reserve the right to refer you to your local dealer.

Kinetico products may be purchases online by approved customers in our service area. Click Here to view our service area. For approval to order online, call us at 800-887-7555.

This cartridge (Part No. 9306B) is designed for the reduction of taste, odor and aesthetic chlorine. This replacement component is for use exclusively in the Kinetico Drinking Water Filter Model 7000 and as a postfilter in Drinking Water Systems.

NOTE: In systems with MACguard (Drinking Water Filter Model 7000), the MACguard Filter cartridge automatically shuts off/reduces flow to a fine trickle after 500 gallons (1,892 litres) of water have been processed. Cartridge replacement is required to restore water flow. In Drinking Water Systems (without MACguard) you should replace your prefilter and postfilter cartridges at least once per year.

Replacement Instructions:

  1. Turn off the feed water to the unit. If you have a Kinetico Drinking Water System with a storage tank, shutoff the valve on the storage tank by rotating the handle (if included). Open the drinking water tap to depressurize the system.  All air/water flow must cease before continuing with Step 2. This may take several minutes.
  2. Disengage the cartridge by turning clockwise. Pull the cartridge down from the head. Discard the cartridge.
  3. Remove tamper-proof cap from the new cartridge by pulling the tear tab. Fill the cartridge with tap water to expel any air.
  4. Insert the cartridge into the head and rotate counterclockwise.
  5. Turn on the feed water. If you have a Kinetico Drinking Water System with a storage tank, open the valve on the storage tank (if included).
  6. Allow the tap to remain open for approximately 15 minutes. It is necessary to rinse a minimum of two tank fills to purge air and rinse carbon fines.
  7. Close the tap.
  8. Check for leaks.
  9. Replacement is complete.